I figured it out.
Just built a 6.5x284 for a buddy.It was a 110 270 win.top load blind mag. last round wont feed out of magazine the back of shell sits too low.Do we need a different follower?
Post up the answer in case another soul is searching for the same thing!
[I]"In the end, run what 'ya brung because it's better than nothing and don't give two ****s what some interwebs chat board guy says about your rig."[/I]
The mag follower where the spring attaches with a screw there was two other screw holes to the rear of the follower.I moved screw back to middle hole it puts more upward pressure on the rear of the follower.works perfect now
Good to know
Thank you for posting
Jack
Bookmarks