Wood screw, any hardware store you choose to go to.
Okay so I found a used T4A for my long action went to swap it out of the choate that it's been in and the screw I have for the rear of the trigger guard won't work. Does anyone know what type of screw I need and where to get it?
Wood screw, any hardware store you choose to go to.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
That's what I have now but the stock has a threaded insert like a pillar
Take your stock to a local hardware store that has a good selection of loose bolts and screws, and hopefully a knowledgeable employee to help find what you need.
Or you could fill the hole with epoxy, insert a waxed wood screw let it cure, take out the screw put trigger guard in place put screw back in, done.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
I would just find the proper sized screw to fit the current setup if it were me.
I'm going to take it to the hardware store thanks
It is a #8-32 screw 1/2 long. I bet manners would send you one if you can not find it.
Thank you Odindad
Bookmarks