No photo's but here are the dimensions: The counter bore diameter =.800" x .260 deep. Thread length is 1.500". The headspace gauge should be .111 below the end of the breech.
Does anyone have a photo of the barrel breech cuts from an early 110 with the extended bolt nose?
Thanks,
Jeff
Jeff518
No photo's but here are the dimensions: The counter bore diameter =.800" x .260 deep. Thread length is 1.500". The headspace gauge should be .111 below the end of the breech.
"As long as there's lead in the air....there's still hope.."
Thank You Sharpshooter, much appreciated.
Jeff518
Bookmarks