sounds like you have a stagger feed 223 and the the 308 mag is center feed
I am in the process of converting a 110 in .223 to .243. Barrel is in and headspace but I am running into issues with the bling mag. The receiver does not have the cut to allow the mag to slide in. The new .308 based mag I order from Midway does not fit in the original stock. What am I missing?
sounds like you have a stagger feed 223 and the the 308 mag is center feed
Just to quickly state the obvious, your parts are mismatched. Now I do not have any info that would help but if you post some pics I bet one of the many knowledgable member here will give you detailed info on what you need to solve the problem.
Bookmarks