Hello everybody, it's been a while. I've got my wildcat (7mm Valkyrie) finished except for some minor cosmetics. I am having great success. It appears that I'm the limiting factor in the potential accuracy of this rig. I have shot a .110" 3 shot group (from 50 yds.) once.

I've been using the 7mm STW as a basic load guide since the caliber and the case volumes are very similar. I've gotten to the point that with my 30" barrel that I'm getting anywhere from 100 to 250 fps. more than the manual lists for the STW or even the 7mm Wby. with no signs of pressure what so ever. I'm at the point where I need to know how much pressure the Savage Stainless 116 action can withstand on a regular basis as well as a maximum pressure, both preferably both in P.S.I. Does anyone know where I can get this type of info that was directly generated by reliable equipment? It seems that someone told me that "Ohler" probably makes this type of equipment. If so, and someone has it I would be happy to compensate whomever for their time as long as it's not too bad. I'd prefer to discuss it beforehand.

Any information or suggestions will be greatly appreciated. I don't get to the forums as much as I used to, so, the best way to get a message to me is via my e-mail neese.paul@yahoo.com if you just leave a note I would be glad to come to this forum to get the info.

Again thank You All Very much, Paul