Go to Boyds(sponsor here) they make the long action thumbhole for stagger feed and with a little work you can make it work for a centerfeed.I've gotten them for $100 delivered.
i currently am looking to replace my tupperwre stock on a savage 110 .243 in long action. Was looing at stockys long range thumbholes and didnt see any that would work for the screw spacing in long action any help will be helpful as i wanna get this thing lookin good. Thanks in advance.
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Go to Boyds(sponsor here) they make the long action thumbhole for stagger feed and with a little work you can make it work for a centerfeed.I've gotten them for $100 delivered.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
How much work is involved in making them fit? Does stockys offer one for the long action? I like their colors and variety.
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Takes less than an hour to fit it, small shim in front of mag box and removal of a little material in front of rear action screw so that the "L" bracket fits and possible sanding of barrel channel,that depends on the contour of your barrel.Now all this is only needed if you own a centerfeed.
Stocky's may have it in the Tundra but colors are limited.
You can also look here http://www.gunpartscorp.com/catalog/...px?catid=12160 these are factory stocks and colors are very limited but there are long action ones you just have to look through them.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
how do i tell if i have center or stagger feed?
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
the stagger feed box will be atached to the reciver
Oh ok thanks kinda had brain fart!!! It is stagger feed. Now the decision is weather or not to have pillars put in and glass bed the action does it really make that big of a diff in accuracy that a hunting rig would benefit from? Just wanna do this right the first time as i dont have a ton of time to build and tear down repeatedly
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
To some it matters.I have a couple that have no bedding and shoot just fine.Only way to tell is put it together and try it, if it is unacceptable take it appart once bed it set the pillars and then try it again. All told taking it appart and putting together is a 5 minute job.
If you look at the Numrich site I posted for you most of them have factory pillars, and believe it or not a lot of rifles are very very accurate with out bedding and or pillars.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
Thats what ive been told. But when it comes down to it i kinda am anal when it comes to doin things. Perfection isnt always good enough,if ya know what i mean,which im sure you do your a barrel nut junkie right?
Model 12 btv .204 nikon monarch 4-16x50<br />Model 110La 243ai 26"brux 1:8 twist sss comp trigger leupold vx3 4.5-14x40 tack driver!!
Bookmarks