Results 1 to 3 of 3

Thread: Will a 260 w/140's seated long eject from TA?

  1. #1
    McKinneyMike
    Guest

    Will a 260 w/140's seated long eject from TA?


    I am still on the fence about my new build and need to know if the target action will eject loaded 260 w/140's or 142's or 243AI with 107's or DTAC 115's?

  2. #2
    pa hog
    Guest

    Re: Will a 260 w/140's seated long eject from TA?

    Just checked mine will eject a .260 loaded to just under 3'' My Port measures 3.082"
    It's not real positive ejection till 2.960"ish

  3. #3
    McKinneyMike
    Guest

    Re: Will a 260 w/140's seated long eject from TA?

    Thanks Pa.

Similar Threads

  1. 300 WM seated to lands
    By Luke45 in forum Ammunition & Reloading
    Replies: 9
    Last Post: 01-07-2014, 10:00 AM
  2. 168 AMAX Seated Too Deep?
    By beartooth91 in forum Ammunition & Reloading
    Replies: 8
    Last Post: 12-25-2012, 01:12 PM
  3. Some of my Primers Not Seated Flush
    By beartooth91 in forum Ammunition & Reloading
    Replies: 12
    Last Post: 07-02-2012, 03:54 PM
  4. Replies: 7
    Last Post: 01-14-2011, 10:35 PM
  5. Can a bullet be seated half way up the neck?
    By mattri in forum Ammunition & Reloading
    Replies: 5
    Last Post: 08-08-2010, 10:49 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •