Short action .308 choate stock

**pepper savage 111** · 09-10-2015, 11:53 AM

Hi guys, so i bought a Choate tactical short action stock and the blind mag inlet is too big. I remember seeing a thread about it a while ago and I can't find it. Can someone provide info on how to make it work or the ling for the thread? Thanks!

**clintsrv** · 09-10-2015, 12:08 PM

Center feed or Staggered feed?

**pepper savage 111** · 09-10-2015, 01:57 PM

Center feed for both.

**clintsrv** · 09-10-2015, 02:18 PM

That's too bad. SF would be no big issue. CF you'll be shimming or bedding the mag in place.

Does it look like its been modified at all?

**pepper savage 111** · 09-10-2015, 02:58 PM

Nope. Both are brand new.

**clintsrv** · 09-10-2015, 03:01 PM

Both as in stock and action?

I just realized we talking about short action so it does matter. I was thinking long action for some reason.
Generally CF stocks are cut tight for mag box, spring/follower and L clip to fit tight.

**pepper savage 111** · 09-10-2015, 03:27 PM

What do i shim it with?

**pepper savage 111** · 09-10-2015, 03:28 PM

Hats what i thought... did i get sent the whong stock? The box and the receipt said SA/CF

**clintsrv** · 09-10-2015, 03:44 PM

I've read little pieces of wood on both sides or epoxy would work good. I've bedded CF mags in LA SF stocks before and it worked great. Just have to position it right. Not sure why the stock you purchased new would have issues. I've only had 1 Choate stock. It seemed of good quality but very bulky and heavy for my liking.

**devildogandboy** · 09-10-2015, 03:46 PM

Originally Posted by pepper savage 111

Hats what i thought... did i get sent the whong stock? The box and the receipt said SA/CF

check the measurement of the screw holes, that should tell you right there. 4.27 is sf and 4.41 is cf. good luck.

Bruce

**clintsrv** · 09-10-2015, 04:19 PM

Originally Posted by devildogandboy

check the measurement of the screw holes, that should tell you right there. 4.27 is sf and 4.41 is cf. good luck.

Bruce

That's the thing to do right there.

Have you bolted the action to the stock yet?

**pepper savage 111** · 09-10-2015, 04:32 PM

I have I didnt think to check to before i barreled the action but when i went to complete the assembly i noticed it... it bolts up fine. Just the mag doesnt fit.... there a good almost 1/4 inch of space left over...