Results 1 to 2 of 2

Thread: WESTPOINT MODEL 167 parts help

  1. #1
    GavinT
    Guest

    WESTPOINT MODEL 167 parts help


    Hi y’all

    I'm stripping and fixing up a WESTPOINT MODEL 167 with a .410 bore and with no series letter, beneath it says STEVENS ARMS. I need to order parts from Numrich, though when I speak to customer service they don’t have this shotgun listed and suggest I use the Savage Model 30 and the Savage 67 Series B as closest models. I’ve read about the prolific manufacturing for other brands and that parts are interchangeable, however, I have these questions I hope someone can answer for me.

    The Ejector Assembly on Numrich looks like this
    http://www.gunpartscorp.com/Search.htm?s=142930 and looks like this is from the 167.


    I’m replacing the damaged screws and pins on the receiver, Numrich says I can order from any results for part numbers 1400550 (Trigger Guard Screw) 399300 (Trigger Guard Pin) regardless of the letter after the part number. If this is the case, do you know why 4 of the 30 results specifically mention .410? The Screw and Pin length on this 167 is 1 1/8”, so should I order the .410 or something else?


    A few more identifiers and pics that I thought might help:

    Cross Bolt Safety (not the top safety)
    2 piece Slide Lock Release, Slide Lock and Spring Assembly (part number 995030). Like the .410 version on the Stevens 77 and Coast To Coast 267
    http://www.gunpartscorp.com/Search.htm?s=995030 (the release spring needs bending)


    Slide Assembly (looks like the 30 SERIES C 410 GA, but firing pin retractor hole is like the 67 Series B 20 Ga.)


    It has the Magazine Tube Yoke and Filling Block.

    I appreciate any help and value your opinions!

    GavinT
    Last edited by GavinT; 08-19-2015 at 10:47 PM.

  2. #2
    heatshield
    Guest
    hi,,just finished an ejector repair on my 69rxl,,fun,,that 410 reciever is smaller so it must take the smaller screws,differnt than the 12 gauge size or others so maybe differnt part no.,, now trigger group parts, tricky,,careful bending,as long as your ejector works clean it and install,if NOT,well,just get a good running replacement,hope this helps bye

Similar Threads

  1. Shotgun: Savage Westpoint 167 series-e 20 gauge disassembly???
    By indeepshitnow in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 5
    Last Post: 02-15-2019, 06:31 PM
  2. Shotgun: Westpoint Model 949 16GA
    By Nick D in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 5
    Last Post: 04-08-2017, 06:18 PM
  3. Shotgun: Westpoint Model 167 TD Series K 12 Gauge
    By uidk0205 in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 0
    Last Post: 08-16-2016, 08:27 PM
  4. Shotgun: Restoring a Westpoint Model 494 - Help Needed
    By jrgoff1982 in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 0
    Last Post: 09-30-2013, 02:43 PM
  5. Rimfire: Westpoint Savage 25
    By spook1 in forum Vintage Savage/Stevens/Fox Firearms
    Replies: 1
    Last Post: 01-16-2012, 12:28 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •