You could always seat the bullet deeper if you have a press and dies.
I recently bought some Nosler 125 grain ballistic tip ammunition, but in attempting to load the bullet is too long and it binds when the rotary mag begins to turn. I had the same issue with some Hornady 168 grain with polymer tips.
Is there anything I can do outside of shooting them as singles? Probably more of a reloading/resizing question, but it is specific to my 99.
Thanks in advance,
Shawn
You could always seat the bullet deeper if you have a press and dies.
"An armed society is a polite society"
"...shall not be infringed" What's the confusion?
Bookmarks