I'm in the process of reloading some hunting ammo. I am using my prefired cases which have been cleaned, trimmed and chamfered inside and out, deprimed, flash boles debured, neck sized, etc... I am using the Barnes 62 gr. TSX BT. and Winchester Small Rifle Primers. WSR. Upon using my Hornady COL. and taking off a .020 back from the lands I found that the four rounds that I have made will only work loading one at a time because of the internal magazine. My question is dose one here have or know what the OAL bullet will be for the internal magazine? I checked with Savage but they will not divulge this information. I have tried to stay as close to the lands as possible but my fourth round always messes up on my attempt to chamber it. Any help and measurements will save me some time will be appreciated.
The Dunning-Kruger effect is alive and well.
Page 6 on the PDF file from the link.
2.250
The Dunning-Kruger effect is alive and well.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks