Bedding a 93r17 TR

[Lorenzo]

Anybody know how I would go about bedding one of these glass and probably pillar? Does anyone know where exactly the action makes contact with the stock? I can kind of tell by some marks on the action but am not 100% sure.
Heres a pretty good article but it seems like quite a lot of work and seems like there would be dangers in ruining the stock if the pillar job isnt done perfectly. Also I do not have the ability to custom machine parts.

[GaCop]

This has got my interest too.

[danielFL]

There is an article on this if you google savage 93 tr action sceew tq or something. Came up in my first page results. I will look for it

[danielFL]

http://rvbprecision.com/shooting/sav...r-bedding.html

[Fotheringill]

Just one word of caution- don't do ANYTHING until you fully understand what the screws hold onto and what and where to bed.