Results 1 to 6 of 6

Thread: 116 .270 barrel

  1. #1
    Basic Member Bolthead's Avatar
    Join Date
    Feb 2015
    Location
    Florida panhandle
    Age
    73
    Posts
    180

    116 .270 barrel


    I recently purchased a 1990s vintage 116, S/N F450xxx. Last night I was taking a good look at the muzzle end and noticed that the bore has what appears to be faint and very fine honing marks similar to what you would see in an engine cylinder. They are on both the lands and grooves. Rifiling appears to be in excellent shape all the way to the muzzle. Just wondering what may have caused these. I have no history on this gun, but the rest of the metal looks like new. Bolt was extremely stiff from machining burrs in the cocking mechanism, which have since been taken care of. Closet queen perhaps?
    AP

  2. #2
    Basic Member
    Join Date
    Mar 2011
    Posts
    50
    There may have been a bit of rust at the muzzle end and someone used a brush impregnated with mild abrasive compound to clean it up.

    mbogo

  3. #3
    Basic Member Bolthead's Avatar
    Join Date
    Feb 2015
    Location
    Florida panhandle
    Age
    73
    Posts
    180
    Doesn't look like anything serious, just very very faint lines. Wish they went the same direction as the barrel. Am going to take it to the range thsi weekend and see how it shoots. Can't wait. The first Savage I wanted to buy was a 116, and now I have one. Love that stainless! Will be fun to compare the .270 to my 30-06.

  4. #4
    Basic Member big honkin jeep's Avatar
    Join Date
    Mar 2007
    Location
    Metro Atlanta Georgia.
    Posts
    2,552
    Choot It!
    A good wife and a steady job has ruined many a great hunter.

  5. #5
    Team Savage GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    5,024
    What your seeing are machine marks from the original boring of the barrel before the grooves were button rifled. Factory barrels don't have the luxury of being lapped when finished. Shooting will smooth out the bore to some degree.

  6. #6
    Basic Member Bolthead's Avatar
    Join Date
    Feb 2015
    Location
    Florida panhandle
    Age
    73
    Posts
    180
    I was wondering if that might be the case. Barrel looks like it has a very low round count. Took it out a couple of weeks ago and put a few rounds down the tube. Couldn't hit the broad side of a large barn. Turned out the action was squirming its' way loose from the squishey no pillar tupperware stock. When I tightened it back up, the bolt started binding. Loosened and re-tightened, bolt was OK. Picked up a two pillar stock that I am going to use until i decide what I really want. Probably why the rifle wasn't used much in the past 20+ years.

Similar Threads

  1. Replies: 2
    Last Post: 05-16-2010, 07:29 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •