Reply With QuoteSounds like your ejector isnt working right. Did you remove it to set your headspace? Some people do, some dont. If so, maybe you didn't get it put back together correctly. The spring could be stuck or broken. Just something to check into.
Scooter
I have a problem that I hoping that the brain trust here will be able to help me with !
I have a Model 10 that was 22-250, and I re-barreled it to 6.5 Creedmore, Shoots great !! but !! I bull the bolt back, and the empty cartage is left laying in the action (it is out of the chamber) ??? if I keep my finger on the body of the empty cartage as I cycle action I can extract the empty, with out fishing it out of the action……. Any suggestions ?
Sounds like your ejector isnt working right. Did you remove it to set your headspace? Some people do, some dont. If so, maybe you didn't get it put back together correctly. The spring could be stuck or broken. Just something to check into.
Scooter
Sometimes a larger detent ball (.140) under the extractor helps.
Another thing to look at are the corners of the lug race in the receiver ring. Typically they're machined square to a point which tends to grab and rip a case out of the extractor especially a 250 improved case, essentially what the CM is. If you stick a pinky in there you can feel it. A tell tale sign is a thin scratch maybe < 1/8" long on the case body just behind the top of the shoulder, the body diameter at that point is larger than the lug race height.
The fix? Knock off both corners to a compound 45, top to bottom-front to back.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Thank you gentelmen for the suggestions
I will check my rifle with all of this information in my back pocket !!!
Will let you know the outcome
Posting Permissions
Bookmarks