I had an LSS for a short action that was designed for either SF or CF. I had a SF rifle installed and had zero problems with magazine.
It feed fine and worked great.
Can you post some pics?
MDTcorp is a member here and may be able to chime in.
After installing my LDT MSS chassis I attempt to put in the AICS mag and it will not go in far enough to lock into the stock. It looks like on this older action that the bottom of the action has metal there preventing the mag from going in all the way. Any suggestions on what to try to get it to seat correctly? Dremel the bottom part of the action some?
I had an LSS for a short action that was designed for either SF or CF. I had a SF rifle installed and had zero problems with magazine.
It feed fine and worked great.
Can you post some pics?
MDTcorp is a member here and may be able to chime in.
Let me know if you need any other pics.
http://i.imgur.com/Hjfn0Or.jpg
This is with me pushing on the mag trying to get it to lock in. Thats as far up as it goes.
http://i.imgur.com/RNWBL7O.jpg
Clip notch side of the mag
http://i.imgur.com/mfi1GDm.jpg
The action from the empty magazine slot
Last edited by shootermcgavin; 06-19-2015 at 08:48 PM.
Bookmarks