338-06 Barrel

[Crowklr]

Looking for a 338-06 barrel for my 110. While there are newer cartridges that will do what this does, this one has been on my bucket list for a long time.

Are there any other options besides Shaw? Nothing wrong with them, just curious if there are any other options.

[fgw_in_fla]

Send Jim "Water Pipe" Apache an email. (Apache Gun Works and Plumbing Supply)
He'll hook you up.

In fact, I've been wanting to build one in that caliber as well.
I like big bullets. Big bullets make big holes.




PS - Read this - http://www.savageshooters.com/showth...unworks-barrel

[Dewey7271]

Send Jim "Water Pipe" Apache and email. (Apache Gun Works

Jim is a good guy. He made me a 338-06 barrel 6 months or so ago and it works great. No issues at all. Good shooting barrel and cartridge IMO.

[earl39]

I had Devin at sinarms build me one. I over spec'd it so it is a wee bit heavy but it shoots great.

[fgw_in_fla]

Allow me to steal / hijack this thread for a moment.

You guys that shoot the 338-06, what kind of velocity and at what weight you getting with it?

[Dewey7271]

A little over 2800 with 62 gr RL17 (drop tube)and the Nosler 210 Partition. 24" barrel. (regular 338-06, add about 50-100 fps for the AI)
IMO, the 210 Partition or 200 Kodiak were made for the 338-06

[fgw_in_fla]

62gr of powder in a 30.06 case with the neck stretched?

I'm gonna have to go back to work to afford more powder. The 300WM I just put together is about put a serious dent in my powder stash.

Thanks for the input.
I think I'll still build one. It's only money & I still haven't found a way to take it with me so I'm spending the kids inheritance on toys.

[Dewey7271]

The RL17 is a little bulky for that but works with a drop tube and a little compression (barely )
The QL capacity for the 338-06 is around 60.9 gr I think so it is a bit full.
I'm going to try some CFE223 in it as it is 95% fill and only gives up around 50 fps although the RL17 shoots well.