Since I have recently decided to bite on a suppressor, I decided I had to have a suppressed 300 WM. I have ordered a 24 inch stainless threaded barrel from Jim at Apache.
Since that barrel was ordered I also found a good deal on another 110 in 7mm MAG that I had to buy. That barrel is very worn so it was pulled. The new plan is to build the 7mm Mag action with the 300WM barrel when it arrives and put that into the laminated stock with the DBM.
I ordered another barrel from Jim in 30-06 with a lightweight sporter contour 22 inches long with a flare at the end and threaded for a suppressor (when it gets out of jail). I plan to put this on the first action so it can be back into its 30-06 glory. The plan is to build this 30-06 into a lightweight rig that I might hunt with this fall if all goes according to plan.
Will post some pictures as this build progresses.
Bookmarks