Reply With QuoteSend it back if its fairly new or is new and make them fix it since you as a customer is deserving that the rifle functions properly. I would send samples of the factory ammo you are using or at least ask them if they want samples.
Hey Y'all,
I have a brand new Savage 10 Predator in 6.5 Creedmoor and that magazine doesn't feed correctly every time. Sometimes it feed smooth, other times it will get caught in the chamber.
It looks like the back of the brass doesn't fully make it out of the case but the neck of the round is up, jamming the bolt action. I pull the action back a bit, the round pops up and I can load it.
Any ideas what the problem is or how to fix it?
Thanks!
Send it back if its fairly new or is new and make them fix it since you as a customer is deserving that the rifle functions properly. I would send samples of the factory ammo you are using or at least ask them if they want samples.
Willing to give back for what the sport has done for me!
If it's a dbm make sure the mag is seated correctly. I had a couple of issues with my 10 PC when I first got it. Seat the rear first then the latch end. You didn't say if your inconsistency was round to round or mag fill/attachment vs the next.
And not saying you don't know how to put a mag in, but I didn't on this rifle at first. Fed fine on one mag attachment, jam the next. I was trying to push it in with the bottom of the mag parallel with the bottom of the stock. It would "catch", and stay in there, but wasn't right.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks