Reply With QuoteMaybe either a worn out firing pin or the bolt spring isn't keeping the bolt all the way foward when it closes. The bolt retainer and springs are held in place by a splined pin that is pressed into the bolt.
My model 64 has been flawless since the purchase of it a few years back. With around 4000 rounds through it now it's starting to have Fell to fire issue's. I've tried different brands of ammo without any luck and have given it a good cleaning a few time's here lately. My question is, could it be the firing pin and can you change to hammer & bolt spring on the bolt? I notice that it's connected to the bolt and when I've cleaned the rifle I haven't figure out how to remove the springs from the bolt.
Any help would be appreciated - Brad
Maybe either a worn out firing pin or the bolt spring isn't keeping the bolt all the way foward when it closes. The bolt retainer and springs are held in place by a splined pin that is pressed into the bolt.
Last edited by Sav 64; 05-10-2015 at 10:45 AM. Reason: Ops
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks