I'm not sure if the Savage B&C Medalist A5 has a blind magazine or Savage DBM inletting?
The Stevens 200 you have is a short action, center feed with blind magazine and top bolt release. So the stock hole spacing is 4.40". If you want to convert to a Savage SA DMB, you will need a metal SA frame assembly (surround) and a SA metal bottom cap. The bottom cap attaches to your current SA metal magazine box and follower. It will then latch into the Savage SA DBM frame assembly. Any aftermarket stocks inletted for Savage SA, CF, DBM, TBR models (10, 11, 14, 16) will work. You'll also most likely want an old-style Savage metal trigger guard. If so, make sure you get the correct frame assembly with the thicker rear lip that works with the old-style Savage TBR trigger guard.
Bookmarks