I have a self inflicted problem in where I stripped the screw hole (yes I learned my lesson) under the bolt release on the trigger guard. The screw still goes in and screws into the action I believe but I am worried that it is may lead to an issue with the stock not fitting well or something else. Is the anyway I can fix it without buying a new stock?
Thanks,
Kirkd1
you stripped the screw or the threaded hole in the receiver? There are no threads in the stock.
[QUOTE=fgw_in_fla;256183]We told you so...[/QUOTE]
If you are talking about the wood screw type fastener, i would use a two part expoy to fill the hole and apply a release agent to the screw and let it sit until cured. I have done this process on my truck grille tabs before and worked like a dream.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks