Results 1 to 14 of 14

Thread: accuracy potential of the .22-250

  1. #1
    Basic Member
    Join Date
    Nov 2009
    Location
    Iowa
    Age
    54
    Posts
    1,337

    accuracy potential of the .22-250


    Everyone knows the .22-250 is a great varmint round, how does it stack up accuracy wise against a .243 or 6br out to 600 yards?

    How does it do in the wind?

    Assuming a decent 26"barrel with the right twist shooting 90grn bullets will it hang with the 6mms?


  2. #2
    wapaloose
    Guest

    Re: accuracy potential of the .22-250

    It will HANG with or better than a lot of calibers,

  3. #3
    dcloco
    Guest

    Re: accuracy potential of the .22-250

    Might have issues pushing a 90 gr in a standard 22/250 case. An AI'd 22/250 would work rather well though.

    Have not shot 90 gr 223 caliber bullets, but, 80 gr AMax's fly rather well to 1000 yards.

  4. #4
    Basic Member Dennis's Avatar
    Join Date
    Dec 2008
    Age
    68
    Posts
    1,870

    Re: accuracy potential of the .22-250

    I own a 22-250 and 243 . . . Just my 2 cents worth . . . anything over 2 hundred yards, I am pulling the 243 out. From what I hear, the 6br is a hard round to beat, even though is a 243 caliper bullet! Many championships have been won with the 6br!
    [B][SIZE=3]Dennis[/SIZE][/B]

  5. #5
    Basic Member trappst's Avatar
    Join Date
    Dec 2006
    Location
    Paris, IL.
    Posts
    424

    Re: accuracy potential of the .22-250

    22-250 was once upon a time "THE" benchrest round....

  6. #6
    Basic Member Dennis's Avatar
    Join Date
    Dec 2008
    Age
    68
    Posts
    1,870

    Re: accuracy potential of the .22-250

    Yes your right!!!!! :D

    All I can say is I am very close to converting my 22-250 into a 6x47 Lapua!

    As stated above, I have the 22-250 & 243! Out of the two, I would pick my 243 for over 200yd shots! The 243 will shoot heavier bullets. You could build a long range 243, but most are building the 6x47L.

    I also have a 223, 270, several 308's and a 6.5x47 Lapua. Now we could probably start the original question all over!

    I don't have a 6br, but shoot with several people who do! One of my friends blows a 3" X out of the target at six hundred yards with his 6br!!!!!!!

    I haven't seen a 22-250 do the same! But it is a great round!

    But in all fairness, I also shoot with a person who shoots a 223 @ 600yds with a 69gr pill. I don't want to be his target at 600!!!!!! I also don't think it would be a good 600yd varmit round.

    If mattri is looking for a varmit round, long range, I would have to recommend the VLP 243 Savage, unless he is willing to build! I might even sell him my 243!

    Again, the 243 & 6x47 are both 243's! If I convert my 22-250 into a 6x47L, I will not have a need for my VLP 243!
    [B][SIZE=3]Dennis[/SIZE][/B]

  7. #7
    82boy
    Guest

    Re: accuracy potential of the .22-250

    22/250 is my #1 favorite commercially available factory chambered round! I would pick a 22/250 any day of the week over a 243 Win. I have seen some impressive stuff out of the 22/250. I would say it is on par with the 6BR in accuracy

    Look at Berger's reference sheet the 90gr bt 22 bullets have the same g7 BC as their 6MM 108 bt match bullets, (.262) and the 90gr VLD has a better BC that any of the 6mm bullets. (.551 g1, .281 g7)

    http://www.bergerbullets.com/Product...20Bullets.html

    And there is similar results when you look at Sierra's web site with comparison between the 90 and the 107. I don't think the 22 is at a disadvantage. The problem with the 22/250 was brass selection, and now Lapua is making brass, and Nosler that problem is over.

    I am a big fan of the 22br, I just think it has an advantage to the 22/250, and it is more efficient. (less powder to do the same work) The 6mm has an advantage in score shooting because it makes a bigger hole, and could get you closer to the x mark. I think the saying is 22's shoot smaller groups, but 6mm shoot tighter aggs.

  8. #8
    Basic Member Slowpoke Slim's Avatar
    Join Date
    Jun 2009
    Posts
    553

    Re: accuracy potential of the .22-250

    I think the 22-250 starts to really shine with a fast twist barrel. It's always seemed ridiculous to me that factories are still making rifles with 1-14 and 1-12 twist barrels? I don't get it.

    A fast twist barrel with a good bullet and the 22-250 really starts getting some "legs" to it. I definitely think it would hang with a 243 with those 90's, vs the 105's or 107's in the 243.

    Of course, no reason not to have both...

    I do

    ;D
    12F, McGowen 6.5x284 1-8&quot; twist, Nightforce 12-42x BR<br />BVSS, McGowen barrel, 22-250 1-9&quot; twist, Nikon 6-18x<br />16 FHLSS Weather Warrior, Sinarms 257 Roberts, Pentax 3-9<br />Stevens 200, 223 bone-factory-stock, Nikon 3-9x<br />Scratch-built BVSS, LW 243 1-8&quot; twist, Viper 6.5-20x50 mil-dot

  9. #9
    Basic Member
    Join Date
    Dec 2006
    Posts
    568

    Re: accuracy potential of the .22-250

    .

    Rumor has it that Savage factory 22-250 rifles won the Hickory North Carolina Groundhog and Egg shoot one year.

    This competition is shot at 100, 300, and 500 yards from supported prone position without windflags, spotters, or any freebie shots to confirm your zero.

    Competitors from around the world come to this annual event which is sponsored by Precision Shooting.


    .

  10. #10
    82boy
    Guest

    Re: accuracy potential of the .22-250

    Quote Originally Posted by Slowpoke Slim
    I think the 22-250 starts to really shine with a fast twist barrel. It&#39;s always seemed ridiculous to me that factories are still making rifles with 1-14 and 1-12 twist barrels? I don&#39;t get it.

    A fast twist barrel with a good bullet and the 22-250 really starts getting some "legs" to it. I definitely think it would hang with a 243 with those 90&#39;s, vs the 105&#39;s or 107&#39;s in the 243.
    Of course, no reason not to have both...
    I do
    ;D
    Amen to that, brother!

  11. #11
    Basic Member EFBell's Avatar
    Join Date
    Dec 2006
    Location
    Bucks County, PA
    Posts
    763

    Re: accuracy potential of the .22-250

    I believe that the accuracy potential of the 22-250 is far greater than mine. Most of us for that matter.
    Ed Bell, PA Deer Hunter & NRA Life Member ~ “The right of the citizens to bear arms in defense of themselves and the State shall not be questioned.”~

  12. #12
    Basic Member
    Join Date
    Nov 2009
    Location
    Iowa
    Age
    54
    Posts
    1,337

    Re: accuracy potential of the .22-250

    Interesting responses. I&#39;ve posted this question in a couple of different places and there&#39;s a pretty even split between those who prefer the .22-250 and thos who prefer the .243/6mm.


  13. #13
    Basic Member DannoBoone's Avatar
    Join Date
    Nov 2008
    Location
    NE Iowa
    Age
    72
    Posts
    93

    Re: accuracy potential of the .22-250

    Many years ago, I was fortunate enough to p-dog hunt with my Dad&#39;s .22-250 prior to making
    a choice of my own center fire. Southwest Nebraska&#39;s winds helped make that decision. I
    went out and got a .25-06. Plastic tips were only a thing of the future back then, but 75gr
    Hornady HP&#39;s, even with their poor BC, certainly bucked the wind on long shots better than
    the .22-250. And yet, overall accuracy of the 250 (during those too few days of calm winds)
    was better than the .25-06.

    That being said, who knows what a tight twist barreled .22-250 with high BC bullets will do
    &#39;til someone tries it!? (Think I would go with the AI version, also.) Savage has made a tighter
    twist barrel for the VLP (1:9?) for heavier bullets, but I&#39;ve never heard how they shoot.

  14. #14
    Basic Member
    Join Date
    Nov 2009
    Location
    Iowa
    Age
    54
    Posts
    1,337

    Re: accuracy potential of the .22-250

    The tighter twist is deffinetely how I would go. The heavier .22 bullets are really popular with the .223 crowd, seems like they would be even better with a little more velocity.

Similar Threads

  1. Accuracy potential flat back vs round back
    By coance in forum 110-Series Rifles
    Replies: 9
    Last Post: 07-11-2018, 08:43 PM
  2. Barrel is not concentric....will it effect the accuracy potential?
    By teebirdhyzer in forum 110-Series Rifles
    Replies: 7
    Last Post: 01-20-2013, 10:51 AM
  3. 110 action accuracy potential
    By hmbleservant in forum 110-Series Rifles
    Replies: 10
    Last Post: 07-11-2011, 09:37 PM
  4. Accuracy potential of a Savage long action?
    By mattri in forum 110-Series Rifles
    Replies: 11
    Last Post: 05-28-2010, 09:09 AM
  5. Mark I/II/93R: Accuracy potential of a pre accutrigger MKII?
    By mattri in forum Savage & Stevens Rimfire Rifles
    Replies: 5
    Last Post: 05-22-2010, 03:13 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •