loosen the screws they are probably a little to tight.
I removed the action from the stock to adjust the trigger. When trying to reassemble I find that when I tighten the rear action screw the bolt removel buttom remains locked to the rear. Any assembly hints?
loosen the screws they are probably a little to tight.
FROGGY
See profile for fire arms
Do it today there maybe no tomorrow
The accu-stock guns are a bit of a PIA to get back together. To start, make sure the accu-wedge is as loose as it will go. Place an allen wrench on the accu-wedge screw and push it up to the top, then place the action in the stock. Then tighten the screws.
Bookmarks