Results 1 to 6 of 6

Thread: First Rounds out of a Savage 10p

  1. #1
    scrtsqrl
    Guest

    First Rounds out of a Savage 10p


    I have had my Savage Model 10p for several months and have been itching to get it to the range. Well last week I finally got the chance. I have been set on getting a new stock since the day I got the rifle. I have been looking into the Choate line because they allow you to use your stock bottom metal. Today I think I changed my mind. Partly because I had to pay 1800 in taxes and secondly because of how well the gun shot.

    I was shooting Norma TAC 150gr. FMJ off of a picnic table off of a bipod. My best group was .46 MOA at 100 yards. I didn't take a picture because I figured I could do this again (NOPE).

    After tightening my scope base back up I averaged just over 1 MOA but had several groups between .5-.75 MOA.

    I then switched to 168gr FGMM and shot one grouping at .99.

    I think I have changed my mind about changing this stock right now.

    I also just ordered reloading gear so hopefully I can get a load that tightens the groups up even more. Any suggestions on powder?

    My complete set up is;
    Savage model 10p
    20" Heavy Barrel
    Regular Stock (Not the Accustock)
    Accutrigger
    UTG Bipod
    Falcon Menace 4-14 scope.


  2. #2
    Team Savage jonbearman's Avatar
    Join Date
    May 2010
    Location
    NY
    Age
    66
    Posts
    1,382
    Reloader 15 in the 168 grain weight is magic. Recobs has some for sale right now. I have had great results with H335,BLC-2 and IMR8208 XBR, Varget. I would change the stock out to an HS Precision, or Bell and Carlson at least as the factory stocks bend a lot and can cut accuracys jugular vein so to speak.
    Willing to give back for what the sport has done for me!

  3. #3
    Basic Member TXCOONDOG's Avatar
    Join Date
    Dec 2014
    Location
    Texas
    Posts
    130
    R15 (between 43-44 grains should be a sweet spot) and 210 primers work great with 160 grainers.

    PS: 4064 is also another good one.
    Last edited by TXCOONDOG; 02-22-2015 at 08:20 PM.

  4. #4
    Basic Member GaCop's Avatar
    Join Date
    Mar 2007
    Location
    Warner Robins, Ga
    Age
    77
    Posts
    5,019
    Quote Originally Posted by scrtsqrl View Post
    I have had my Savage Model 10p for several months and have been itching to get it to the range. Well last week I finally got the chance. I have been set on getting a new stock since the day I got the rifle. I have been looking into the Choate line because they allow you to use your stock bottom metal. Today I think I changed my mind. Partly because I had to pay 1800 in taxes and secondly because of how well the gun shot.

    I was shooting Norma TAC 150gr. FMJ off of a picnic table off of a bipod. My best group was .46 MOA at 100 yards. I didn't take a picture because I figured I could do this again (NOPE).

    After tightening my scope base back up I averaged just over 1 MOA but had several groups between .5-.75 MOA.

    I then switched to 168gr FGMM and shot one grouping at .99.

    I think I have changed my mind about changing this stock right now.

    I also just ordered reloading gear so hopefully I can get a load that tightens the groups up even more. Any suggestions on powder?

    My complete set up is;
    Savage model 10p
    20" Heavy Barrel
    Regular Stock (Not the Accustock)
    Accutrigger
    UTG Bipod
    Falcon Menace 4-14 scope.

    Center to center measurement should put that group right at 3/4".

  5. #5
    SniperGoat
    Guest
    Nice!

  6. #6
    Basic Member huntin1's Avatar
    Join Date
    Mar 2007
    Location
    North Dakota
    Age
    65
    Posts
    121
    Nice shooting. I'm using Varget right now and 175 Berger VLD'S. Thinking of trying Reloader 15, but the 175's shoot so well with the varget I don't know why I want to try something new.

Similar Threads

  1. Savage Axis 308 HR - 2100 rounds
    By ivob in forum Axis Series Rifles
    Replies: 8
    Last Post: 10-08-2017, 10:06 AM
  2. How many rounds should a Savage LRP 260 barrel be good for?
    By Onewolf in forum 110-Series Rifles
    Replies: 2
    Last Post: 11-08-2013, 01:08 AM
  3. Length of rounds in a Savage DBM
    By GeorgeS in forum 110-Series Rifles
    Replies: 5
    Last Post: 10-25-2013, 06:01 PM
  4. How many rounds to break in a new Savage Model 10?
    By wahoowad in forum 110-Series Rifles
    Replies: 2
    Last Post: 09-13-2010, 12:31 AM
  5. Trouble feeding rounds in Savage 10 Precision carbine
    By beradon in forum 110-Series Rifles
    Replies: 9
    Last Post: 12-21-2009, 01:11 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •