I have a Savage 10FP that is giving me a few problems. The two are:

1) the bolt handle get stuck/hard extraction. I shoot mostly reloads (43g of 4064 and 168g SMK's) and at first I thought it was my loads. There are no pressure signs though. Today was the first day a case got stuck in the chamber. Anyone have any idea what the problem could be? I've read that savages have bad extractors but this seems to be more than that.

2) light primer strikes. I ran the gun for a year with no problem using the same load as above. This summer I started getting light primer strikes. It dimples the primer but no ignition. Really annoying. I relaced the firing pin spring with a heavy spring and I still got 6 today out of 40 rounds. My only other thought could be bad primers. I might go buy a new box along with some factory ammo and run that through it. Any other ideas?