Reply With QuoteIt can be done if you are willing to do some dremel / mill work and add pillars and bedding.
Hello,
Is it possible to install a center feed stock on a staggered feed action, I have a Stevens 200 in 300 win mag with a staggered feed magazine (magazine attached to the action)?
Last edited by Buster95; 01-10-2015 at 02:35 PM.
It can be done if you are willing to do some dremel / mill work and add pillars and bedding.
I did it on a BVSS stock and put a staggerfeed right in with minimal milling. Then I bedded it with pillars that were kinda big to make up for the front hole on a short action. The other was a long action and it was mill a pocket for the mag , then bed and done.
Willing to give back for what the sport has done for me!
Posting Permissions
Bookmarks