.
Any good reason not to have at least two -- preferably three -- single-station presses like the RCBS Rockchucker mounted side-by-side in your reloading room ?
Even if you have a good progressive.
.
No good reason at all - have a dedicated de-prime press and two other single stages for things like seperate seating and crimping steps on thin-walled 44 WCF or 40-72 brass.
I have thought about setting up a dedicated 30-06 assembly line for M1 ammo (just don't like to run it on the Dillon for some reason) - may get around to it one day.
I have two RCBS Rockchuckers, one RCBS JR and one Lee. Always seem to find something for each of them to do.
Charlie
laportecharlie
The only good reason would be that you didn't have room for 4.
Never kick a fresh turd on a hot day- Harry Truman
Bad enough if you only have room for one!
Oz never gave nothing to the Tin Man, that he didn't already have.
No hay problemo! I have two; a Forester Co-Ax and a Rockchucker.....would have another but I too am limited by space.
uj
I have 2 single stations and a progressive on my bench. Seems like a fairly usefull setup.
Ed Bell, PA Deer Hunter & NRA Life Member ~ “The right of the citizens to bear arms in defense of themselves and the State shall not be questioned.”~
Oh, He11! I forgot the Dillon 550 out on the back porch. The setup is too big for my miniscule "Man Cave".
uj
I have 2 progressives and 2 single stages, 2 shotshell presses on my bench. Then 2 other presses on the shelf that I switch from time to time. Works for me.
OMG.....I also forgot about the two MEC loaders (12 and 28) stored on the back porch.
Are you sure that shotshell loaders count?
uj
Posting Permissions
Reply With Quote
Bookmarks