Results 1 to 6 of 6

Thread: Barnes 160 grain 338-06

  1. #1
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,091

    Barnes 160 grain 338-06


    I want to load some hunting rounds for my 338-06 using Barnes Tipped TSX 160 grain bullets but I have found very little info. As a matter of fact I can find only two receipts both on Barnes web site. Has anyone used these and what powder and weight did you use?

  2. #2
    Team Savage 35Whelenshooter's Avatar
    Join Date
    Feb 2009
    Location
    Tomah, Wisconsin
    Age
    62
    Posts
    218
    I can look and report back in then morning, after my pot of coffee. Lol
    [FONT=Comic Sans MS][SIZE=3]U.S. Army Retired Disabled Veteran[/SIZE][/FONT]

  3. #3
    Basic Member scope eye's Avatar
    Join Date
    May 2008
    Location
    Sebring FL
    Posts
    2,795
    RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.

  4. #4
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,091
    Thanks scope eye, I did find some more receipts at IMR web site.

  5. #5
    Team Savage 35Whelenshooter's Avatar
    Join Date
    Feb 2009
    Location
    Tomah, Wisconsin
    Age
    62
    Posts
    218
    Olddav,

    This is the information that I have found for the 338-06.

    Revised 10/2008
    ♦ Indicates most accurate load
    Bullet Weight: 160 gr Case Trim Length: 2.484" S.D. 0.200
    Bullet Style: Tipped TSX FB Primer: Fed GM210M B.C. 0.342
    COAL: 3.290" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Charge Velocity Charge Velocity Load
    Powder (grains) (fps) (grains) (fps) Density (%)
    ♦ H335 57.0 3095 62.0 3241 93
    Win748 63.0 3093 68.0 3261 105
    Bullet Weight: 185 gr Case Trim Length: 2.484" S.D. 0.231
    Bullet Style: TSX BT Primer: Fed GM210M B.C. 0.352
    COAL: 3.250" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Bullet Weight: 185 gr Case Trim Length: 2.484" S.D. 0.231
    Bullet Style: MRX BT Primer: Fed GM210M B.C. 0.379
    COAL: 3.340" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    .338-06
    Minimum Maximum
    Charge Velocity Charge Velocity Load
    Powder (grains) (fps) (grains) (fps) Density (%)
    ♦ H4895 52.5 2758 55.5 2925 97
    AA 2520 58.0 2829 63.0 3015 98
    Bullet Weight: 210 gr Case Trim Length: 2.484" S.D. 0.263
    Bullet Style: TSX BT Primer: Fed GM210M B.C. 0.404
    COAL: 3.350" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Charge Velocity Charge Velocity Load
    Powder (grains) (fps) (grains) (fps) Density (%)
    ♦ RL 15 50.0 2565 53.0 2689 93
    Win 760 57.0 2603 64.5 2820 103
    Bullet Weight: 225 gr Case Trim Length: 2.484" S.D. 0.281
    Bullet Style: TSX FB Primer: Fed GM210M B.C. 0.386
    COAL: 3.350" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Bullet Weight: 225 gr Case Trim Length: 2.484" S.D. 0.281
    Bullet Style: MRX BT Primer: Fed GM210M B.C. 0.433
    COAL: 3.360" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Charge Velocity Charge Velocity Load
    Powder (grains) (fps) (grains) (fps) Density (%)
    ♦ RL 15 48.0 2436 51.5 2592 93
    H414 54.0 2515 61.5 2699 101
    Minimum Maximum
    Minimum Maximum
    Minimum Maximum
    .338-06
    Bullet Weight: 250 gr Case Trim Length: 2.484" S.D. 0.313
    Bullet Style: Banded Solid Primer: Fed GM210M B.C. 0.208
    COAL: 3.280" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Bullet Weight: 250 gr Case Trim Length: 2.484" S.D. 0.313
    Bullet Style: TSX FB Primer: Fed GM210M B.C. 0.425
    COAL: 3.350" Barrel Length: 25"
    Case: Winchester Twist Rate: 1:10"
    Charge Velocity Charge Velocity Load
    Powder (grains) (fps) (grains) (fps) Density (%)
    ♦ Big Game 52.0 2322 57.0 2493 105
    Win 760 50.0 2306 56.5 2497 97
    Minimum Maximum

    You can also visit there site.

    http://www.barnesbullets.com/informa...data/data-338/
    Last edited by 35Whelenshooter; 01-10-2015 at 05:47 PM. Reason: updating my post
    [FONT=Comic Sans MS][SIZE=3]U.S. Army Retired Disabled Veteran[/SIZE][/FONT]

  6. #6
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,091
    Contacting Barnes was the answer, they replied with a several receipts.

Similar Threads

  1. Looking for accurate reload datta for 338-06 in 180 grain & 250 grain
    By blackbart338-06 in forum Ammunition & Reloading
    Replies: 2
    Last Post: 07-05-2013, 10:49 PM
  2. Replies: 0
    Last Post: 01-06-2012, 01:07 PM
  3. berger and barnes 22 cal 30 grain hornet loads
    By zap in forum Ammunition & Reloading
    Replies: 3
    Last Post: 01-06-2012, 12:09 AM
  4. Barnes 62 grain TSX Load
    By danw791 in forum Ammunition & Reloading
    Replies: 4
    Last Post: 08-01-2010, 01:47 PM
  5. WANTED LOADS FOR 180 GRAIN AND 170 GRAIN PROJECTILES FOR 308
    By barry t in forum Ammunition & Reloading
    Replies: 2
    Last Post: 04-23-2010, 09:19 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •