I have not done that stock, but quite a few others. Relieve about 1/8th of an inch or more and it should not crack. For mag wells I use Styrofoam blocks cut a little larger than the well and shove them in there, then put plumbers putty around the edges to seal. If it does get inside there, it's no big deal, just dremel it out when hardened. Then do the normal stuff... plenty of putty inside anything you don't want epoxy and careful use of release agent. Be sure not to create any mechanical locks. When done, take 2 Xanax and go to bed, trying not to think about it till morning.
Bookmarks