I am having a weird problem. I was mounting scopes on 2 rifles. 1 is a 30 year old 110 and the other is a pre accu trigger 111. I set the scopes one a Leupold VX 3 and one a VX 2 in the middle of the adjustment range. I then mounted the scopes in Burris mounts and bore sighted. To get the cross hairs to zero I needed to adjust one all the way to the stops up and one all the way down. I tried both scopes on the 110 and they both hit the same place on the bore sighter. I also shot the 110 a 30-06 and I had to adjust the scope all the way down to hit at 25 yards. Any ideas?