Large shank lefty in 22.250 (tight neck) with a 1:10" twist Pacnor supermatch and a stainless SSS lug and tactical bolt handle.
[img width=600 height=450]http://img.photobucket.com/albums/v214/Fjold/Guns/DSC01037.jpg[/img]
I was wondering if anyone had any pics of their rifles mounted in a Choate Sniper stock.
Thanks
Kris
Large shank lefty in 22.250 (tight neck) with a 1:10" twist Pacnor supermatch and a stainless SSS lug and tactical bolt handle.
[img width=600 height=450]http://img.photobucket.com/albums/v214/Fjold/Guns/DSC01037.jpg[/img]
Frank
One rifle, one planet, Holland's 375
Very nice looking rifle!! How do you like the stock? If you did it again would you get the same stock?
Thanks
Kris
I have a Choate US and a UV. I prefer the UV. It is just as stable a platform and it is lighter. The US also has some very sharp inpressed "checkering" that is meant to be used by gloved hands. Most folks I know knock the tops off with 220 sandpaper so it is a little easier on the hands.
uj
Oops, mine's the Ultra-varminter. For the cost it's a good stock, there's enough adjustability in the cheekpieces (you can shim them if you're between sizes) and the buttstock to get them to fit most people.Originally Posted by stealthshooter
Frank
One rifle, one planet, Holland's 375
You ain't kidding there, those points are harsh, I've thought about parking my new stock in the kitchen for when I need to grate cheese or garlic :POriginally Posted by Uncle Jack
Whenever the legislators endeavor to take away and destroy the property of the people, or to reduce them to slavery under arbitrary power, they put themselves into a state of war with the people, who are thereupon absolved from any further obedience
I love the looks of rifle.
Here is mine. Model 111 left handed with a 28in douglas premimum air guaged barrel, full 1in dia. Cal 6.5x55.
And yes, I really like this stock!
[img width=600 height=347]http://img.photobucket.com/albums/v606/JeepsAndGuns/oldgun061.jpg[/img]
I have this stock on a 110 tactical police .300 winmag. Its heavy and well built. Good deal I think ( unless you want to carry it somewhere! )
Here's mine:
[img width=600 height=450]http://i644.photobucket.com/albums/uu165/psharon97/P2211480.jpg[/img]
28" SSS Douglas Barrel 1.10" twist 308 winchester
SSS Competition Trigger
SSS T&T job
Choate UV stock
Millet BuckGold 6-25x56 scope
personally, I love the stock. It fits me very well and is a fun gun altogether to shoot.
They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.
Boy, why do all you guys have the bolt on the wrong side??? ;D
mine is under construction. [img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/img1273455316263.jpg[/img]
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Here was my .308 Have since went with a B&C Medalist A2. Didn't like how the UV sat on the rear bag.
[img width=600 height=400]http://i897.photobucket.com/albums/ac172/dinosdeuce/Stevensbuildcopy.jpg[/img]
Hey Blue Avenger,Originally Posted by Blue Avenger
I'm leaning towards your setup, maybe not as short though.
How's the handgrip area? If I have to cut and sand, will it come out the same? Barrel channel?
Like it?
Larry
Tinkerer
If using a rifle action you have to stay over the 26.5" total length or go to Jail. The stock which is what I am guessing you were referring to, you can do what you like.
The grip is hollow but could be filled with resin or epoxy. It is a bit thick feeling. I am going to fill mine and thin it some.
The forend is also hollow. I cut this one back to the stiffener inside. I was able to thin the sides of the forend to match the contour of the main body. the block out front is hollow so filling the forward grip area or the inside cavity is going to be needed to change the contour much. the majority if the stock is hollow and about 3/8 thick walls.
from the inside, it just looked easier to cut it here.
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/img1273843418199.jpg[/img]
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/img1273843209653.jpg[/img]
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
[img width=600 height=450]http://img.photobucket.com/albums/v675/gcidso123/savage/img1273844001078.jpg[/img]
.223 Rem AI, .22-250 AI, .220 Swift AI .243 Win AI, .6mm Rem AI, .257 Rob AI, .25-06 AI, 6.5x300wsm .30-06 AI, .270 STW, 7mm STW, 28 nosler, .416 Taylor
Bookmarks