Reply With QuoteI use 243 WSSM for the neck and shoulder and a gutted 270 WSM on mine.
Dean
Guys I am looking for some ideas as to what your using for dies as well as your necking down process. Plan on using 270wsm as the parent case. Any help would be appreciated.
Blaine
I use 243 WSSM for the neck and shoulder and a gutted 270 WSM on mine.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Dean are you able to go from 270 down to the 243 wssm?
Thanks
Yes I run them through my 6.5 WSM dies first, then my 25 WSSM then finish off with the 243 WSSM dies, you can do it in one pass with the 243 WSSM, but they come out nicer if you do multiple steps, and WSSM dies are not that expensive, and they 6.5 WSM dies are lee they were only 30 some odd dollars.
Dean
RUMs are like woman in Stiletto heals, you know they are going to put you in the poor house, but that has never stopped anyone from pursuing them.
Perfect. Thanks for the information.
Blaine
Blaine as per our PM's I just use a 270WSM Redding Bushing die and have multiple bushings to step it on down.
Dean: didn't know you had one.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Posting Permissions
Bookmarks