I've got an older 110CL (left handed) Series J (30-06) and my extractor and ejector are gone from the bolt head (not exactly sure what happened, but they both clearly need to be replaced). I was firing some factor xp3 rounds, and would get a few that would sound odd and the primer would blow off the round and seize on the bolt head.

I'm not too worried about replacing the extractor, spring, and ball; but what I can't figure out is the ejector.

It looks like half of the ejector may still be in the ejector hole (meaning, it may have broken off?), and I can't get the ejector pin to budge from one side, and I can't see/feel any of it from the half-moon side, so I don't know if the pin is seized/busted as well.

Any help would be appreciated....