Hi all. I am trying to attach this scope to this old Savage 110 from 1958. The rear part of the receiver has a flat top, the front is curved. Is there any rail on the market that has a flat/curved base? If not, should I buy 2 smaller ones? I'm on a tight budget but want to do something that will hold up to the abuse this 30-06 provides.
Thanks in advance. Photo link here:
https://flic.kr/p/q34Jz8
Look for rail and or 2 piece bases for savage long action with "flat back" you should be fine, they were all that way till not all that long ago.
http://www.opticsplanet.com/egw-sava...flat-back.html
Just to confirm, using a caliper, measure the distance, center to center, of the 2 middle screws. I am curious if they were any different than later models. If not, rails are easy to find, still being produced.
Last edited by foxx; 12-07-2014 at 12:28 AM.
Pretty sure EGW makes one that will fit
A good wife and a steady job has ruined many a great hunter.
Flat backs are also called pre-accutrigger.
"Muzzle velocity is a depreciating asset, not unlike a new car, but BC, like diamonds, is forever."-German A. Salazar
EGW has a flat back base, I thinking its less than $40.00 shipped. If you are really watching your pennies Weaver's #413 is for a Savage long action flat back, cost approx $25.00(?). Both may be availiable at Midway USA or other online stores.
Plus one on the EWG rail. Great quality for the money. I have 3 or 4 of them. Tim
Just get the EGW rail and be done with it! Been there done that. You will be glad you did.
Members who have read this thread in the last 1 days: 0
Posting Permissions
Reply With Quote
Bookmarks