Devcon bedding

[limige]

Only used acraglass so far. I was to try Devcon. Exactly what product are you using. Link would help.

[GaCop]

I use the Devcon "Steel Putty" in the blister packs. I get it at my local building supply.

[LongRange]

http://www.zoro.com/i/G2114576/?gcli...Fc1AMgodrWwAHw

This is about the cheapest place ive found it...

[tammons]

I use gray marine-tex and neutral kiwi shoe polish as a release agent.

[gotcha]

Oops

[6mmBR_Shooter]

http://www.zoro.com/i/G2114576/?gcli...Fc1AMgodrWwAHw

This is about the cheapest place ive found it...

Agreed. I also recommend the neutral polish.

[WYcoyote]

http://www.zoro.com/i/G2114576/?gcli...Fc1AMgodrWwAHw

This is about the cheapest place ive found it...

Good stuff here.

[foxx]

I have used JB Weld and Accraglass and I prefer Devcon 10110 and Accrarelease from Brownells.

[LongRange]

I also use the neutral kiwi.

[BillPa]

I use Kiwi or Johnson's Paste wax, no preference one over the other.

Bill

[GaCop]

I use gray marine-tex and neutral kiwi shoe polish as a release agent.

+1 for the neutral Kiwi shoe polish.

[limige]

Thanks guys I plan to give this route a try sinve everyone seems to like it so much