I use the Devcon "Steel Putty" in the blister packs. I get it at my local building supply.
Only used acraglass so far. I was to try Devcon. Exactly what product are you using. Link would help.
I use the Devcon "Steel Putty" in the blister packs. I get it at my local building supply.
http://www.zoro.com/i/G2114576/?gcli...Fc1AMgodrWwAHw
This is about the cheapest place ive found it...
I use gray marine-tex and neutral kiwi shoe polish as a release agent.
Last edited by tammons; 11-22-2014 at 12:42 PM.
Oops
Last edited by gotcha; 11-22-2014 at 06:44 PM.
I have used JB Weld and Accraglass and I prefer Devcon 10110 and Accrarelease from Brownells.
I also use the neutral kiwi.
I use Kiwi or Johnson's Paste wax, no preference one over the other.
Bill
Each morning eat a live green toad, it will be the worst thing you'll have face all day.
Thanks guys I plan to give this route a try sinve everyone seems to like it so much
Bookmarks