Thanks to this forum I was able to solve - at least to my satisfaction - the accuracy problem I had with an old 111 7mm Rem Mag I acquired in a trade. (1) I followed the advice to make sure the barrel was floating from tang to crown. (2) Brought the trigger pull down from 7 lb to 4 lb w/o replacement. (3) Tightened up the action screws to torques suggested on this site. I can now make dime sized three round groups at the 25 yd indoor range, and am looking forward to trying it at the 100-yard indoor range that will be opening up this winter here.

On a related note, I refitted my Axis 243 SS with a Rifle Basix trigger now set a 3 lb and will take it to the range shortly. How low should I go?