Takeoff stock from Model: 110 FCP HS Precision Interchangeability Action and Magazine

[wcmd]

I have found a good deal on a takeoff stock from Model: 110 FCP HS Precision chambered in .338 Lapua Magnum.
Would like to know if this will work on my 110P chambered in 7mm Remington Magnum?
I am assuming all the bolt spacing for connecting the action to the stock is the same for all Savage long actions?
The stock comes with a magazine for .338 LM. Am pretty sure that this magazine will not work for my 7mm RM, but would a 300 Winchester Magnum magazine for a Model: 110 BA work in the HS stock with no modifications?
Thanks for looking,
wcmd

[GaCop]

Someone else will no doubt chime in and correct me if I'm wrong but, I believe the 338 LM uses a special action that is different from a standard 110 long action.

[wcmd]

Thanks for the post,
Savage long actions are all the same,
http://www.savageshooters.com/showth...g-338-lapua-hs
I checked out the 338 Lapua magazine and a 300 Winchester Magnum magazine on Friday and I could not tell the difference. So I purchased the stock and I'm waiting for it to be delivered. Will post again when I get it and mate it to my action.