Need a Savage trigger sear. Where to buy?

**KTP** · 10-23-2014, 09:48 PM

I need a trigger sear part # 105268. They are $9.00 on the Savage web site but you have to be a gunsmith to buy one.
Where can I pick one of these up?

**geargrinder** · 10-23-2014, 10:27 PM

Brownells, sells the top release sear. But it is out of stock.

http://www.brownells.com/rifle-parts...turer_1=SAVAGE

Keep an eye on gunbroker and ebay.

**dubnali** · 10-23-2014, 10:29 PM

What about Numrich?

This is the first model 10 schematic I pulled up:
http://www.gunpartscorp.com/Manufact...CYXP-33618.htm

**KTP** · 10-24-2014, 07:56 AM

Thanks guys, I'll look around on Numrich. This is the Accutrigger sear.

**short round** · 10-24-2014, 09:14 AM

Accutrigger & Nonaccu are same.

**KTP** · 10-24-2014, 05:35 PM

Thanks all. Have one on order!!

**Newtosavage** · 01-09-2021, 09:56 AM

Hate to dredge up an old thread, but I'm still looking for a 110 newer trigger sear.

Any help where to find one would be appreciated.

**Fotheringill** · 01-12-2021, 10:00 AM

BTW-

They won't sell a $2.00 spring for a trigger to a non-gunsmith either.

**Texas10** · 01-12-2021, 05:31 PM

You'll have to employ the services of a gunsmith. Take your serial number to him and ask that he order a sear for your serial number firearm. They're not terribly expensive, your local gunsmith may or may not markup the price. Expect it will take several weeks.

Are you wanting a top bolt release sear for a accutrigger? You can probably get the sear or the whole trigger off someone here for less trouble.

**Newtosavage** · 01-13-2021, 03:32 PM

Originally Posted by Texas10

You'll have to employ the services of a gunsmith. Take your serial number to him and ask that he order a sear for your serial number firearm. They're not terribly expensive, your local gunsmith may or may not markup the price. Expect it will take several weeks.

Are you wanting a top bolt release sear for a accutrigger? You can probably get the sear or the whole trigger off someone here for less trouble.

Except that I'm not ordering a sear for a gun I have. I'm ordering a sear to change out my trigger group. I'm converting an early Chicopee Falls gun to the newer style top bolt release sear so I can install an aftermarket trigger. I'll try here first. Thanks.