Model 10 front action screw with hs stock. Need help

[hafejd30]

I have a model 10 that I was installing an hs stock on. My torque wrench hit the recommended 65 lbs and promptly stripped the hex head. I was able to get the screw out but am wondering if someone can tell me which size screw this is and if a hardware store might carry it. Midway states there out of stock. It's 3/4 inch long. Thank you in advance

[GaryBF]

The action screws are ¼-28 thread. I hope your 65 lbs was INCH pounds and not FOOT pounds!

[hafejd30]

Thank you. And yes. Using a wheeler engineering torque wrench. Have several hs and choate stocked rifles and this is the first time one stripped on me.

[D.ID]

Your local ace hardware has buckets of them and the deeper allen head of a "standard" alen head bolt is much stronger than the cutesy little shallow head "OEM" bolt. After stripping one and then breaking one.........I replace them right of the bat as a matter of standard procedure.

[pitsnipe]

Another idea (I have done this for the same reason) is change to Torx head screws. Far more torque bearing surface. You would be very hard pressed to strip out one of them.




Snipe

[bythebook]

I bought a bag of 100 at Ace hardware and they come in handy.

[shooterfpga]

Another idea (I have done this for the same reason) is change to Torx head screws. Far more torque bearing surface. You would be very hard pressed to strip out one of them.




Snipe

Ive been trying to find the right type of screw to fit in mine and the only ones i keep finding that are the correct tpi are those dumb cap socket ones that are like giant versions of the ones used for rail mounts and scope rings.

[BillPa]

Ive been trying to find the right type of screw to fit in mine and the only ones i keep finding that are the correct tpi are those dumb cap socket ones that are like giant versions of the ones used for rail mounts and scope rings.

https://www.boltdepot.com/Socket_but...sh_1_4-28.aspx

...or if you want stainless https://www.boltdepot.com/Socket_but...-8_1_4-28.aspx

Order the 1-1/2" or 2" then cut them to length.

Bill

[shooterfpga]

https://www.boltdepot.com/Socket_but...sh_1_4-28.aspx

...or if you want stainless https://www.boltdepot.com/Socket_but...-8_1_4-28.aspx

Order the 1-1/2" or 2" then cut them to length.

Bill

Thank you! Ive never even seen this site before. Now how do you figure out whether its hex or torx? Im wanting to convert mine to torx because im tired of stripping them out.

[hafejd30]

Thank you for the responses. Had the information that I needed in minutes. This forum is awsome. Have a fastenel rep getting the screws I need and the gun will be finished.

[shooterfpga]

Thank you! Ive never even seen this site before. Now how do you figure out whether its hex or torx? Im wanting to convert mine to torx because im tired of stripping them out.

I mean on that site. I cant see the screw head and i dont see where it lists what it takes?

[BillPa]

I mean on that site. I cant see the screw head and i dont see where it lists what it takes?

Look at the details, "Drive type -Allen, Drive Size 5/32"

Bill

[shooterfpga]

Hey i figured it out. I just had to click on one of the products listed. Im definately buying anything i need from here now on. Holy cow they are detailed.