Reply With QuoteYes you can. Not difficult at all. Been there done that.
I want to convert a model 12 target to 7mm WSM or SAUM. I know the correct push feed SA boltface does not exist. Can I get my gunsmith to cut down the 'tail' on a long action magnum boltface so it will fit the short bolt ?
Yes you can. Not difficult at all. Been there done that.
+1. I did that exact thing for my 6-WSM. Remember to recut the chamfer back into the rear after you grind it down. Otherwise your firing pin will stop really short, and of course rest your pin protrusion as with any bolt head swap.Originally Posted by wbm
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Do I need to change the baffle and the firing pin as well ?
No on the baffle.
With the firing pin you will just need to adjust out your protrusion. In the fired position you need .035"-.040" sticking through the face.
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
6WSM - I'd like to see a thread on that!!
I'll see what I can do. Still working up loads trying to go faster and faster, but so far I am up to 3750fps with a 105 A-Max.
Sorry for the derail, now..............
204, 22 K-Hornet, 222, 223, 22-250, 22-250AI, 6BR, 243, 243AI, 6-06, 6-WSM, 250-3000AI, 270, 7-08, 7RM, 30BR, 308, 30-06, 375 H&H, 444 Marlin, 450BM, 458WM
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks