I currently am dealing with a nightmare on a glass bedding job on my axis with a custom stock from boyd's and don't know what else to do. the bedding seized up the action screws and the heads were stripped in the process and once i was able to get the bolt open after putting it in the freezer I found that bedding compound had gotten into the chamber I attempted to chip it out into the action and got the cleaning rod stuck in the compound/ Barrel I am at my wits end and no longer know what to do does anyone have any tips? I'm already debating on weather I should take it in to a gunsmith, buy a new rifle and install it to the stock after I have extracted the screws and cleaned up the flashing that remains from the glass bedding please help I am open to suggestions