I have seen Lyman tang sights with long tails and short tails for a 99.
What's the scoop?
Which one will fit a 1928 99 G?
I have seen Lyman tang sights with long tails and short tails for a 99.
What's the scoop?
Which one will fit a 1928 99 G?
I'll bet Mad Dog has one of each -- and if anyone can answer this, he can!
Old No7
"Freedom and the Second Amendment... One cannot exist without the other!"
Both.
The long tail is for the older models, as I recall. Mine is the long tail mounting tang, but, the sight is offset to the left (from the shooting position) with adjustment knobs.
First off thanks for this great forum and my apologies for digging up this old thread - but have been searching long vs short tang Lyman peep sight information.
I am wanting to install a tang peep on my inherited 99 to help with my old eyes for hunting
I was lucky enough to find a windage adjustable Lyman 29 1/2 long tang peep sight.
Further research indicated Lyman made a short tang version of this sight.
Can anybody help shed some light as to why Lyman offered the short tang?
Was this for specific models or use with scopes installed?
Is the hole placement the same in the tang or the sight?
Does the short tang version offer any advantages?
Thank you in advance for any help and patience with my dumb questions!
I realize that for some "tangers drive them wild"
Thank you!
moose99
There is room for all of God's creatures ... Right next to the mashed potatoes
They both do the same thing, it's just a different variation, maybe they were saving steel. I believe there were actually 3 or 4 different variations of the 29 1/2.
Savage- "never say never".
Bookmarks