Results 1 to 7 of 7

Thread: Thouhts on these to go with 10FCP....

  1. #1
    biggsig
    Guest

    Thouhts on these to go with 10FCP....


    Finally acquired a new Model 10 FCP-5R and after reading numerous posts on this forum, can't wait to shoot it. I won't be doing any competitive shooting but an occasional hunt and some fun target shooting out to 600yds is about all the action it will see. Till then, I'm researching some other accessories and have narrowed it down to the following:
    • Vortex Viper HS-T 4-16X44 OR the Viper 4-12X40 scope OR a similar SWFA
    • EGW 20 MOA base
    • Burris Extreme Tactical Rings
    • Harris Bipod (9-13") or Blackhawk Sportster TraverseTrack Bipod (9-13")


    Still have to find a cheek pad/rest but I do have a question about the EGW base. Is it common to have to apply a filler to install these or are they fairly tight out of the package? Any thoughts/experiences with my potential additions? I'd post a pic when the project is complete!

  2. #2
    Basic Member eddiesindian's Avatar
    Join Date
    Feb 2013
    Age
    64
    Posts
    1,412
    Its been my expierence that the hardware that the egw comes with aint worth s***
    egw is over priced.
    Ive since gone Weaver 20 moa base on all my rigs...half the price....hardware is spot on.
    Life is tuff.....its even tuffer when your stupid
    {John Wayne}

  3. #3
    Basic Member
    Join Date
    May 2011
    Location
    Lower Alabama
    Posts
    1,091
    I have an EGW and a Weaver one piece base, both 0 MOA, each installed on its own flat back 110. Before installation both needed bedding. If your budget allows I would select the EGW it sets higher and therefore has more room to load the rifle (blind mag). They even have a steel 20 MOA base if that strikes your fancy.

  4. #4
    DzNutz
    Guest
    My Setup - Savage 10FCPK .308
    Vortex Viper PST 6-24x 50mm MOA Reticle
    Millett 1-Piece Picatinny-Style Scope Base
    Burris medium 30mm Signature Zee Rings
    Leapers UTG Gen Mid Pro Shooters Bipod
    BlackHawk IVS Rifle Cheek Rest

    Pictures and such in Journal - http://www.savageshooters.com/showth...Report-Journal

  5. #5
    64cuda
    Guest
    I saw NightForce has a 20 MOA base, think MidWayUSA has them for $116

  6. #6
    LongRange
    Guest
    the Murphy precision bases have fit perfect on my riffles.

  7. #7
    Basic Member
    Join Date
    Jan 2009
    Location
    Macon, GA
    Posts
    1,071
    I have installed a few EGW bases on my rifles and haven't had a problem with them. Both the Vortex and the SWFA scopes should have plenty of elevation to get out of 600 yards.
    They who would give up essential Liberty, to purchase a little temporary Safety, deserve neither Liberty nor Safety.

Similar Threads

  1. 10FCP-SR or 10FCP-HS
    By benellibill in forum 110-Series Rifles
    Replies: 5
    Last Post: 05-18-2016, 12:24 PM
  2. 10fcp-k
    By EMTSmokeeater681 in forum 110-Series Rifles
    Replies: 5
    Last Post: 12-11-2013, 12:34 PM
  3. New 10FCP HS
    By Perry in forum Optics
    Replies: 1
    Last Post: 02-21-2012, 12:16 AM
  4. 10FCP SA DBM
    By lomfs24 in forum 110-Series Rifles
    Replies: 4
    Last Post: 04-13-2011, 10:36 PM
  5. New 10fcp hs
    By Banjobob in forum 110-Series Rifles
    Replies: 1
    Last Post: 07-23-2010, 01:28 AM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •