SSS Competition Trigger Assembly

[Rosco]

Recently purchased a 10FCP Barreled Action from the classifieds, and part of the deal was that it came with SSS Competition Trigger albeit not installed. Problem is I am think it is missing some a components, although I could be wrong. Below is a picture of everything that came along with the BA. Can you guys verify this for me?



If this is everything, where I can get instructions on how to install?

Thanks....

[shooterfpga]

Not a good picture but all i can see that might be missing is the trigger spring and the bolt that holds it to the action....

[Rosco]

Yeah I thought a spring was missing to but wanted to make sure.

[foxx]

You won't be able to see the trigger spring. The bolt that holds it to the trigger "bracket thingy" is the screw with a silver nut on your trigger housing. I am thinking its all there. It can't really be lost, though it can become dislodged from its position, in which case they have to fix it, you won't be able to. (it's internal) PM me your e-mail and I will scan and send you the instructions.

[shooterfpga]

Good info foxx. So are these non adjustable then? Or is that silver nut how you adjust it?

[foxx]

Oh, they are very adjustable. Very nice. You need the instructions, though. It's a too different from the factory version for me to explain here.

[jonbearman]

You can get the instructions right off their site or just google it.

[Rosco]

Thanks Foxx PM sent