Reply With QuoteTake it apart and clean off all the anti-seize, then re-install with just a drop of oil on the threads. Anti-seize is not needed, and it only makes the torque reading off.
Hey guys,
Just seeking some words of wisdom as to what might have happened and what will I do next.... I have a target action with a CBI 6.5X47 Lapua barrel which I put together myself. It has an improved barrel nut and recoil lug. I torqued the barrel in the action at 44 lbs two months ago adding some anti seize. Tonight as I proceeded to check the rifle before a range trip, something felt loose. Then I discovered the barrel was loose such that I can unscrew it with my hand. Hmmmm, why is this happening and what should I do differently tomorrow as I put the platform together? The stock is a B&C Medalist (free floated).
Take it apart and clean off all the anti-seize, then re-install with just a drop of oil on the threads. Anti-seize is not needed, and it only makes the torque reading off.
"As long as there's lead in the air....there's still hope.."
I found that Savage torques the barrel nut to 70 lbs. Of course I found a lot of other recommendations too so..............................
Members who have read this thread in the last 1 days: 0
Posting Permissions
Bookmarks