Results 1 to 4 of 4

Thread: Finally got a decent load

  1. #1
    romad97
    Guest

    Finally got a decent load


    I built my first savage about ayear ago. i haven't had a lot of range time with it but I finally got a load that I think is fairly decent. It took a whole lot of trial and error but this is what I came up with. 40.8gr of IMR 4831, win brass and win large rifle primer, 2.76 COAL, 105gr beger VLD, 3 shot group was right at .235 at 100 yards at 2857 fps. I cant wait to get out and shoot it out to 600 now that I finally have a good recipe for it.


  2. #2
    Team Savage
    Join Date
    Feb 2010
    Location
    Kennedy Meadows,CA.
    Age
    73
    Posts
    4,788
    Looking good

  3. #3
    Basic Member
    Join Date
    Sep 2012
    Location
    MN
    Posts
    806
    Kinda like knocking one over the fence!

  4. #4
    romad97
    Guest
    Now I just hope it groups like this out to 600

Similar Threads

  1. finally a decent new barrel
    By 110 7mm BA in forum Picture Post
    Replies: 15
    Last Post: 01-07-2018, 04:41 AM
  2. Is this a decent deal?
    By n10sivern in forum 110-Series Rifles
    Replies: 2
    Last Post: 03-30-2013, 11:00 AM
  3. Decent Group. Model 10
    By SlimySquirrel in forum 110-Series Rifles
    Replies: 5
    Last Post: 02-27-2013, 05:06 PM
  4. Mark I/II/93R: Decent scope for a Mark II for groundhogs
    By sav2011 in forum Savage & Stevens Rimfire Rifles
    Replies: 18
    Last Post: 06-07-2011, 11:37 AM
  5. Finally, found a load for my 6.0x47L
    By Dennis in forum Ammunition & Reloading
    Replies: 3
    Last Post: 01-18-2011, 06:01 PM

Members who have read this thread in the last 1 days: 0

There are no members to list at the moment.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •