Ok so I bought a new bell and carlson medalist sporter stock for my older preaccutrigger savage 110. The stock looks and feels great but there is one big issue. The front action screw bottoms out a decent ways before it tightens the stock down on to the aluminum bedding block. Since this is an older savage could it be my action screws are simply too long for the B&C stock or could it be an error in the stock? Fitment for the rest of the stock is actually almost perfect so I suspect it may be the older action screws...if that is the case what should I do? Is there anywhere I can buy newer action screws? If so...is the threading the same?