That is a personal fashion issue, so....
To me, they don't look "funny", they look like there is more chance for cooling.. $0.02
I currently have a barreled action that I need a stock for. Every stock that I find that I like seems to be for a varmint contoured barrel. How goofy does a sporter barrel look inside of a varmint contour channel? I have never seen one.
That is a personal fashion issue, so....
To me, they don't look "funny", they look like there is more chance for cooling.. $0.02
I'm a firm believer in the theory that if it bleeds, I can kill it.
I would think that it would look goofy, but it could be an opportunity to do something creative. Glue (Acraglass) some exotic wood and recut the barrel channel perhaps. Or just let it look goofy.
You could always glass bed the sporter barrel into the larger barrel channel to make it look better. Wrap the sporter barrel in a layer of masking tape, clay at the muzzle end of the barrel channel to keep the bedding materiel in the channel. Put one layer of masking tape of the front of the recoil lug, wax the barrel and recoil lug well and your all set to bed the barrel with Acraglass, Devcon or Marine Tex. The masking tape with allow the barrel to be free floated when the bedding hardens and the tape is removed.
Probably not brush friendly but aside.from that another +1 with darkker.
You could always slide a piece of black garden hose over the barrel and pretend its HV :)
Bookmarks