Rimfire Savage Striker no shim trigger job

[oneissuevoter]

I was about to perform the " Shim" fix on my rimfire savage striker. I took the trigger group out. I stoned the sear face and lever contact surfaces, then I started looking at the engagement spring.

I had a AR15 LPG kit in my smithing tackle box, and realized the bolt catch spring was the same diamiter but shorter.

I put it in. Took the travel take up screw all the way down to the keeper bolt, and reassembled.

Perfect 3.2 lb trigger with no shim.

Try it.

[JCalhoun]

Cool!

[oneissuevoter]

Ill post pics of the 100m five shot groups this weekend.

[oneissuevoter]

Success!!!









Last two fast

[oneissuevoter]

All fired at 100m. 5mph wind R-L. 40 Gr Winchester super x .22 WMR. 7.5 inch barrel. 10x magnification on the scope.

Triangles are 1 inch.

[oneissuevoter]

What it was before the trigger job- fliers were hard to avoid:

2 inch hivis-

[JCalhoun]

Very nice!